27
placement when mounting and aiming the camera
.
The height
above from the ground for placement of the device should vary
with the size of animal you are hoping to see. In general, 3 to 6
feet is preferred.
You can avoid potential false triggers due to temperature and
motion disturbances in front of the camera by not aiming it at a
heat source or nearby tree branches or bush (especially on
windy days).
Do NOT install the camera behind the glass window as that is
not possible to sense any motion. Avoid aiming the camera
toward to any glass objects.
10.3. Starting
The camera supports three working modes, "Motion Detection",
"Time Lapse" and "Hybrid", press
START
button to enter
surveillance mode.
(1) If you set the camera
’
s working mode as "Motion detection"
in the menu, the camera will count down a 30-second delay,
and then will be ready to go into standby (surveillance) and
capture. Any motion that is detected by it will trigger the
capture of an image or video as programmed in the menu. Be
sure you have read the descriptions of the Detection Delay, and
PIR Sensitivity parameters.
(2) If you set the camera’s working mode as "Time Lapse" in
the menu, the camera will be ready to go into "Time Lapse"
mode soon after the START button is pressed, and then will
take images periodically according to your preset "Timelapse
Interval" parameter, regardless of the settings "Detection
Delay".
(3) If you set the camera’s working mode as "Hybrid" in the
menu, the camera will work according to the above two modes.