18
8.6. Important Notes on App Wi-Fi Connection
No.
Notes
1
When the camera’s Wi-Fi is connected, the camera
will stop SURVEILLANCE (motion detecting or time
lapse). Disconnect Wi-Fi to enable the camera to go
back to SURVEILLANCE mode.
TIP: How to re-enable the camera start motion
detection?
Tap the camera ID "JOHN_GardePro_E8P" to
disconnect or remove the current camera, or add new
camera (refer to the following figures).
2
On the phone device, when the app is closed or runs
in the background, there is a maximum of 90-second
timeout of Wi-Fi connection between app and camera,
before timeout, you can re-open and operate on the
app without reconnecting. However, the camera will
not work (capture motions) until the Wi-Fi timeout is
done. Before timeout, you must disconnect Wi-Fi
manually to enable the camera to capture motions.
3
When the app connects to the camera, the RED
indicator will flash once.