14
choice, you can set your camera name).
The app automatically searches for all Wi-Fi trail cameras
nearby, please make sure your camera is within the Wi-Fi
range. This process may take up to 15 seconds. If there is no
device shown in the list, please click the Refresh button on the
top-right corner.
Tap the one you want to add (
Figure 10
). The app starts
connecting to your camera. It might take up to 15 seconds to
build the Bluetooth and Wi-Fi connection between the app and
camera. There are 4 steps (Illustration omitted):
Step1 – Connecting through Bluetooth…
Step2 – Activating the camera…
Step3 – Searching Wi-Fi... The camera display will turn off
during Wi-Fi connecting.
Step4 – Connecting through W
i-
Fi…
Figure 11: Allow Wi-Fi Connection on iOS Device
A system pop-up message will show (
Figure 11
).
Please tap "
Join
" to allow Wi-Fi connection. The string
"CAM8Z6_E9316A9F2066" is the name of Wi-Fi hotspot on
the camera to allow Wi-Fi connection. Among cameras, the
prefix CAM8Z6 is fixed, E9316A9F2066 is the internal camera
identifier which may vary from different cameras.
NOTE:
On Android devices, there might be different system
pop-up messages that ask for allowing app connection to