70
6.FUEL
WARNING
·Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel.
·Wipe up all spills before starting the engine.
·Make sure to stop the engine and allow it cool before refueling the unit.
·keep open flames away from the area where fuel is handled or stored.
IMPORTANT
·Never use oil for 4 cycle engine use or water cooled 2-cycle engine. It can cause spark
plug fouling, exhaust port blocking, or piston ring sticking.
·Mixed fuels which haue been left unused for a period of one month or more may clog
the carburetor or result in the engine failing to operate properly. Put remained fuel into an
air-tight container and keep it in the dark and cool room.
·Mix a regular grade gasoline(leaded or unleaded, alcohol-free) and a quality proven
motor oil for air cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
Gasoline 40:Oil 1
7.OPERATIO
N
STARTING THE ENGINE
WARNING
·Before starting the engine, inspect the engine unit for loose fittings or fuel leaks, and the cutting attachment is properly
installed and securely fastened.
·Keep the cutting head clear of everything around it.
1. Move the choke lever to the closed position.
(1)Choke lever (2) Close (3) Open
2. While holding the unit firmly, pull out the starter rope quickly,
3. After the engine has started, open the choke gradually.
4. Allow the engine to run for 2 to 3 minutes to warm up.
