66
4.SAFETY PRECAUTIONS
BEFORE USING THE MACHINE
(a)
Read this owner’s manual carefully to understand how to operate this unit properly.
(b)
This product has been designed for use in cutting grass, and it should newer be used for
any other purpose
(c)
You should never use this brush cutter when under the influence of alcohol, when suffering
from exhaustion or lack of sleep. when suffering from drowsiness as a result of having taken
cold medicine, or at any other time when a possibility exists that your judgment might be
impaired or that you might not be able to operate the
brush cutter properly ang in a safe manner.
(d)
Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
(e)
When using this product for the first time, before beginning actual work, learn to handling
the brush cutter from skilled worker.
(f) Be sure to keep this manual handy so that you may refer to it later whenever any questions
arise.
WORKING GEAR AND CLOTHING
(a) When using your brush cutter, you should wear
proper clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3)Thick work gloves
(4)Non-slip-sole work boots
(5)Ear protectors
(b) Never use your brush cutter when wearing pants with
loose cuffs, when wearing sandals, or when bare foot.
THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER
(a)Before beginning work, look around carefully to get a feel for the shape
，
and remove any obstacles which can be
cleared away.
(b) Make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents, or any other problems which mingt
interfere with safe operation. Be especially careful to check that there is nothing wrong with the blades or with the joins
by which the blades are attached to the brush cutter.
(c) Never use blades that are bent,warped,cracked,broken or damaged in any way.
Keep the blade always sharp.
(d) Check the bolt to fasten the blade and be sure the blade turns smoothly without abnormal noise.
NOTES ON STARTING THE ENGINE
1.Take a careful look around to make sure that no obstacles exist within a perimeter of 15m or less around brush cutter.
2.Place the body of the brush cutter onto the ground in a flat clear area and hold it filmly,in place so as to ensure that
neither the cutter parts nor the throttle come into contact with any obstacles when the engine starts up.
3.Place the throttle into the idling position when starting the engine.
KICKBACK SAFETY PRECAUTIONS
1.Before beginning work, clear your working area and remove grasses around the obstacles.
2.When using your brush cutter, do not grip other parts except the handles.
