POWXG4060
EN
Copyright © 2013 VARO
P a g e
|
4
www.varo.com
Do not operate in poor lighting.
Keep all parts of your body away from any moving parts and all hot surfaces of the unit.
Wear a face filter mask in dusty conditions to reduce the risk of injury associated with the
inhalation of dust.
Check the work area before each use. Remove all objects such as rocks, broken glass,
nails, wire, or string which can be thrown or became entangled in the machine.
Keep firm footing and balance. Do no overreach. Overreaching can result in loss of
balance or exposure to hot surfaces.
Comply with all fire prevention regulations. Compliance with all local, state, or federal laws
is the user
’s responsibility. Never operate the unit without a spark arrestor screen; this
screen is located inside the muffler.
To reduce the risk of the fire and burn injury, handle fuel with care. It is highly flammable.
Empty fuel tank and restrain the unit from moving before transporting in a vehicle.
Turn the unit off before setting it down.
Before storing, allow the engine cool.
Do not smoke while handling fuel.
Mix and store fuel in a container approved for gasoline.
Mix fuel outdoors where there is no sparks or flames.
Select bare ground, stop engine, and allow cool before refueling.
Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap.
Tighten the fuel cap securely after refueling.
Wipe spilled fuel from the unit. Move 30 feet (9 m) away from refueling site before starting
engine.
Never attempt to burn off spilled fuel under any circumstance.
Maintain the unit per maintenance instructions in this Operator
’s Manual.
Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace damaged
parts.
to use rakes and brooms to loosen debris before blowing/vacuuming.
to slightly dampen surfaces in dusty conditions or use mister attachment.
to use the full blower nozzle extension so the air stream can work close to the ground.
6
MACHINE-SPECIFIC SAFETY WARNINGS
Always hold the blower in your right hand, refer to the Operation Instructions in this
manual.
To reduce the risk of hearing loss associated with sound level, hearing protection is
required.
Rotating impeller blades can cause severe injury. Stop the engine before opening the
vacuum door or installing/changing tubes. Do not put hands or any other object into the
vacuum tubes while they are installed on the unit.
To reduce the risk of injury associated with contacting rotating parts, stop the engine
before installing or removing attachments. Do not operate without guard in place. Always
disconnect the spark plug before performing maintenance or accessing any movable parts.
Do not point the blower nozzle in the direction of people or pets.
Never run the unit without the proper equipment attached. When used as a blower, always
install the blower tubes.
7
ASSEMBLY
WARNING Stop the engine and put the switch to “STOP” place before
installing parts, making adjustments, cleaning, or when not in use. Failure to
do so could result in possible serious personal injury.
