background image

1800 909 909 

www.powertoolsupport.com      email: [email protected]

AFTER SALES SUPPORT 

46460

10

2

General Information & Safety Instructions

•  Ensure you use oil-mix fuel. Ensure that you mix 25 parts unleaded fuel to 1 part 

2-stroke oil. If not, the engine will overheat and cause damage to your chainsaw.

•  Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do 

not smoke when filling fuel tank.

Kickback safety precautions

•  Kickback may occur when the tip of the guide bar touches an object, or when the 

wood closes in and pinches the saw chain.

•  If the bar tip or point contacts, it can produce a rapid reverse reaction, kicking the 

guide bar up and back towards the operator. This is known as rotational kickback.

•  Pinching the saw chain along the top of the guide bar may push the guide bar 

rapidly back towards the operator. This is known as pinch kickback.

•  Either of these reactions can cause loss of control of the saw, resulting in serious 

personal injury.

•  Do not rely exclusively on the safety devices built into your saw. Take the 

following steps to help avoid accident or injury:

•  Reduce the element of surprise by understanding what causes kickback.
•  Keep a firm grip on the chainsaw using both hands, the right hand on the rear 

handle and the left hand on the front handle when the motor is running. A firm 
grip will help maintain control. Do not let go whilst the motor is running.

•  Make sure that the area of operation is free of obstructions. Do not let the point 

of the guide bar contact a log, branch or any other object.

•  Use high speeds when cutting.
•  Do not overreach or cut above shoulder height.
•  Carefully follow the sharpening and maintenance instructions given in this 

manual.

•  Use only replacement bars and chains specified by the manufacturer.

Содержание PCH25





























Отзывы: