![background image](http://html1.mh-extra.com/html/gardenline/gpcs46z/gpcs46z_user-manual_3538897015.webp)
14
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB
0845 872 2740
019022605
GPCS46Z, 06/14, 52579
Getting Started
5
Before starting the machine
Chain brake mechanical test
Your chainsaw is equipped with a Chain brake that reduces
possibility of injury due to kickback. The brake is activated if
pressure is applied against the brake lever when, as in the event
of kickback, the operator’s hand strikes the lever. When the brake
is actuated, chain movement stops abruptly.
Warning: The purpose of the chain brake is to reduce the
possibility of injury due to kickback; however, it cannot provide
the intended measure of protection if the saw is operated
carelessly. Always test the chain brake before using your saw and
periodically while on the job.
To test the chain brake (FIG 9)
a. The Chain brake is DISENGAGED (chain can move) when the
BRAKE LEVER IS PULLED BACK AND LOCKED.
b. The chain brake is ENGAGED (the chain is locked) when the
brake lever is pushed forward. It should not be possible to move
the chain.
b
a
FIG 9
Note: The brake lever should snap into both positions. If this is not
the case do not use your saw. contact the helpline immediately
using the details provided.
Fuel and lubrication
Fuel
Use regular grade unleaded fuel mixed in a ratio of 40:1 with
2-stroke engine oil (JASO FC GRADE OIL or ISO EGC GRADE) for
best results.
Содержание GPCS46Z
Страница 37: ...GPCS46Z 06 2014...