Gardenline GPCS46Z, Руководство пользователя

Страница: 13 / 37

12
www.coreservice.co.uk AFTER SALES SUPPORT
IRE GB
0845 872 2740
019022605 GPCS46Z, 06/14, 52579
Note: To ensure that the bar and the chain are supplied with oil
when in use, USE ONLY THE ORIGINAL BAR. The oiling hole (FIG 5/
Item A) must be kept clear of dirt and any build-up of residue.
A
FIG 5
a
b
1. Pull the chain-brake back and ensure that it has been released.
(the chain cover can only be removed with the chain-brake
disengaged)
2. Then remove the securing nuts on the chain cover
3. Take out the packing piece (f) and dispose of it responsibly
4. Fit the chain around the bar ensuring that the direction of the
chain is as depicted in the picture on the bar. Fit the chain on
the sprocket. Adjust the position of chain tensioner so the
tensioner pin locates in the hole on the bar.
5. Adjust the tension to ensure that there is not too much slack
in the chain. (FIG 7)
Note: Make sure the tensioner pin is located in the assembly hole
on the bar.
Note: Pay attention to the correct direction of the saw chain.
Compare with the picture near the chain sprocket and the picture
on the bar.
a. Tensioner nuts
b. Chain cover
c. Clutch
d. Tensioner pin (located in
assembly hole)
e. Cutting link
f. Packing piece
FIG 6
c d e
f
Direction of chain