Gardenline GLSA 1231 Скачать руководство пользователя страница 7

7

Handling

A

  Only use the equipment in broad daylight or in well-lit conditions;

B

   If possible, the equipment should not be used on damp grass, but if 

this cannot be avoided, take special care to ensure that you do not slip;

C

  Always maintain good footing on slopes;

D

  Only operate the equipment at a walking pace;

E

  Always guide the equipment across slopes, never straight up or down;

F

  Be particularly careful when you change direction on a slope;

G

  Do not work on overly steep slopes;

H

   Be particularly careful when you turn the equipment around or pull 

it toward yourself;

I

 

 Stop the tools if the equipment has to be tipped to one side for transport 
purposes. Stop the tools if you cross any surfaces other than grass and whilst 
transporting the equipment from and to the area on which you wish to use it;

J

   Never use the equipment with damaged or missing safety devices, e.g. without 

deflector plates and/or the grass collecting device;

K

  Do not adjust or overclock the engine speed settings;

L

  Uncouple all tools and drive units before you start the engine;

M

   Use the ON/OFF switch with caution, according to the manufacturer’s advice. 

Make sure that your feet are far enough away from the tool(s).

N

   Do not tilt the equipment when you start the engine, unless the equipment must 

be raised off of the ground a little, in order to start it. In this case, tilt it as little 
as absolutely necessary and only raise the side opposite to that of the user;

O

   Do not start the motor if you are positioned in front of the chute;

P

   Never move your hands or feet toward or under any rotating parts. 

Keep clear of the chute opening at all times;

Q

   Never lift or carry the equipment with the engine running.

General Information and Safety Instructions 

2

AFTER SALES SUPPORT

GB

IRE

0151 649 1500

1890 946244

GLSA 1231, 61307, 08/2014

www.einhell.co.uk

Содержание GLSA 1231





























Отзывы: