14
14
Fig 17
19
Instructions
5
AFTER SALES SUPPORT
GB
IRE
0151 649 1500
1890 946244
GLSA 1231, 61307, 08/2014
www.einhell.co.uk
Changing the roller (see Figures 17-20)
IMPORTANT!
Wear work gloves!
Only replace the roller with a genuine replacement roller, as this will ensure
top performance and safety under all conditions.
Carry out the following steps to change the roller:
- Remove the two Allen screws (Fig. 17/Item 14) using the Allen Key (Item 17).
- Lift the roller on this side and pull out in the direction of the arrow (Fig. 18).
- Now slide the new roller in the direction of the arrow (Fig. 20) onto the
square-ended drive (Fig. 19/Item 19) and press into the holder (Fig. 20).
- Refasten the roller with the two Allen screws (Fig. 17/Item 18).
19
Fig 19
Fig 18
Fig 20
