23
Useful Information
6
AFTER SALES SUPPORT
GB
IRE
0151 649 1500
1890 946244
GLSA 1231, 61307, 08/2014
www.einhell.co.uk
Fault
Possible cause
Remedy
The motor
does not start.
No voltage present.
Check the power cord and fuses.
Power cord defective.
Check power cord.
Switch, switch/plug
block defective.
Have machine checked by an
electrician or service centre.
Connections to
motor or capacitor
disconnected.
Have machine checked by an
electrician or service centre.
Housing clogged.
If necessary adjust working depth.
Clean housing so that the roller
can run freely.
Engine
performance
drops.
Soil is too firm.
Change working depth.
Housing clogged.
Clean housing.
Roller badly worn.
Replace roller.
Imprecise
scarifying
result.
roller worn.
Replace roller.
Wrong working depth.
Correct working depth.
Motor is
running, roller
is not rotating.
Toothed belt is torn.
Have machine checked by an
electrician or service centre.
IMPORTANT!
To protect the motor it is equipped with a thermal overload switch which
cuts out when overloaded and starts again automatically after a short
cooling-down period.
