9
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/2014
91568
•
Take care to ensure that any sparks generated du-
ring use do not cause any danger, e.g. by hitting
persons or igniting inflammable substances.
•
Take care to ensure that the air vents are not blo-
cked whenever you carry out work involving the
generation of dust. Should you have to remove
any dust, first disconnect the electric tool from the
mains power supply (only use non-metallic objects)
and avoid any damage to inner parts.
•
Use safety goggles and ear-muffs.
•
You should also wear protective clothing and
equipment such as a dust mask, work gloves,
apron and helmet.
•
The grinding tool runs on after the tool is switched
off.
•
The tool may only be used in the open air with
extension cables which have been certified as sui-
table for the purpose. The extension cables used
must have cross-sections of least 1.5 mm2. The
plug-and-socket connections must be equipped
with earthing-contacts and protection against rain-
water.
•
Do not use any saw blades.
Always keep these Safety Instructions in a safe place.
GLCS_85_E_AUS_SPK7.indb 9
05.06.14 13:56
