24
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/2014
91568
Technical data
Rated voltage: ...................................... 220-240V~ 50Hz
Power input: .................................... S2:20 min 85 watts
Idle speed: ...................................................... 5500 min
-1
Adjustment angle: ................... 35º to the left and right
Grinding wheel Ø (inside): .............................23.23 mm
Grinding wheel Ø (outside): .....................max. 108 mm
Grinding wheel thickness: ..................................3.2 mm
Totally insulated: ................................................... II /
&
Weight: .................................................................. 2.2 kg
Load factor
A load factor of S2 20 min (intermittent periodic duty)
means that you may operate the motor continuously
at its nominal power level (85 W) for no longer than
the time stipulated on the specifications label (20 mi-
nutes ON period). If you fail to observe this time limit
the motor will overheat. During the OFF period the
motor will cool again to its starting temperature.
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 61029.
L
pA
sound pressure level ................................ 73.4 dB(A)
K
pA
uncertainty .................................................... 3 dB(A)
L
WA
sound power level ................................... 84.4 dB(A)
K
WA
uncertainty ................................................... 3 dB(A)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
GLCS_85_E_AUS_SPK7.indb 24
05.06.14 13:56
