Gardenline GDGS12G, Руководство пользователя

Страница: 18 / 24

Troubleshooting
24
Troubleshooting
Problem Possible cause Solution
The LEDs on the
charger
11
do
not light up.
The mains plug or the
rechargeable battery
9
have not been correctly
inserted.
− Check whether the mains plug
of the charger has been cor-
rectly inserted into the mains
socket.
− Check whether the battery
is securely positioned in the
charging compartment and is
in contact.
The battery life is
too short.
The battery
9
is not cor-
rectly charged.
− The battery only reaches its
maximum charge level and its
maximum duration after 4 to 5
charge cycles.
The saw will
switch off when
working.
The rechargeable battery
9 is almost empty and
must be charged. When
the battery is completely
charged, it may be that
the thermal voltage pro-
tection of the battery has
been activated. This may
happen if the saw is used
over a longer period.
− Let the rechargeable battery
stand in the charger for an
hour. This time is necessary so
that the battery can cool off
and the protective circuit can
be reset.
Sparks can be
seen through the
air vents.
− This is normal and absolutely
no cause for concern.
The saw has no
power.
The charger
11
has not
been inserted.
− Connect the charger with a
properly installed socket.
The saw blade 1
is coming loose.
The saw blade has not
been inserted correctly.
− Insert the saw blade as far as
possible into the saw blade
holder 4 .
The locking mechanism of
the saw blade holder 4
has not been returned to
the starting position.
− Insert the saw blade as far as
possible into the saw blade
holder and ensure that the
locking mechanism for the saw
blade holder has turned clock-
wise to the stop point.