Repairs
22
NOTICE!
Risk of damage!
Improperly cleaning may lead to damage.
− Do not use any aggressive cleaners, brushes with metal or nylon bristles
or sharp or metallic cleaning utensils such as knives, hard scrapers and
the like. They could damage the surfaces.
− Never use a solvent to clean plastic parts.
Cleaning the saw
− Use a soft cloth or brush to clean the housing.
− Use a soft brush to remove any dust that has collected from the device openings.
− Remove dust or chips by blowing them out with compressed air.
Maintaining the saw
− Keep the saw and the vents clean to ensure proper, safe work.
− Check regularly whether dust or foreign bodies have entered the saw near to the
motor and around the power switch
12
.
− Regularly lubricate all moving parts.
− Before and after each use, check the saw and accessories (e.g. saw blades) for
wear and damage. Replace any accessory parts if necessary. Observe the techni-
cal requirements in the process.
− Regularly check all fixtures. They could come loose over time due to vibration.
If you identify any damage, you must have it repaired by a specialist workshop
to prevent risks.
Repairs
There are no parts that can be repaired by the user inside the saw. If you identify
damage, contact a specialist workshop or qualified personnel. Repairs performed by
the user and opening the housing void your warranty claim.
If the mains cord of the charger is damaged, it must be replaced by a special network
cable which can be obtained from the manufacturer or the manufacturer’s customer
service department. The mains cord may only be replaced by a specialist workshop or
qualified specialist personnel.
Содержание GDGS12G
Страница 24: ......
