7
Helpline No. UK / N.IRELAND 0845 603 9277 Rep. Ireland 1890 8823 74
Web Support www.gardenhomepower.com
Model Number: EL 600 Electric Raker
•
Check the condition of the cutting cylinder, and ensure that all threaded
connections are securely tightened.
•
If the tines are blunt, take it to a specialist workshop for repair, if
necessary.
Once per season
•
Lubricate the tines and shaft.
•
At the end of the season, have the tool checked and serviced in a specialist
workshop.
Cleaning
Attention! Clean the tool after each use. Failure to carry out proper
cleaning may result in damage to the tool or cause it to malfunction.
Warning! Injury may occur when working on the tines.
Wear protective gloves !
Whenever possible, clean the tool right after you have fi nished working with it.
•
Clean the underside of the housing around the tines and the protective
shield and fender with a scrubbing brush, and a brush or soft cloth
dampened with a mild soap and water mixture. Never splash the tool with
water!
•
To remove soil and debris from the tines and transmission, use a stiff brush
or dampened cloth.
•
Clean the air vents; remove any remaining grass or dirt.
•
Once cleaned, wipe the tine and shaft dry and apply a light coat of oil.
8. Storage
The tool should be stored in a dry and clean place and out of the reach of
children.
During extended periods of storage as, for example, during the winter, ensure
that the tool is protected against corrosion and frost.
At the end of the season, or if the tool is not to be used for longer than a
month:
•
Clean the tool.
•
Wipe all metal surfaces with an oil-impregnated cloth to protect them from
corrosion (resin-free oil), or apply a fi ne coat of spray oil.
•
Fold the guide bar down, and store the tool in a suitable place.
9. Repair Service
Repairs to electrical tools may only be carried out by skilled electricians.
If you send the machine to us for repair, please describe the fault.
Attention! Electrical repairs may only be carried out by a skilled electrician or
a customer service workshop!
10. Waste disposal and environmental protection
If your device should become useless somewhere in the future or you do
not need it any longer, do not dispose of the device together with your
domestic refuse, but dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collecting/recycling point.
By doing so, plastic and metal parts can be separated and recycled. Informa-
tion concerning the disposal of materials and devices are available from
your local administration.
11.
Technical Data
Technical specifi cations
Model
EL 600
Rated Voltage:
V~ 230
Nominal Frequency
Hz 50
Nominal Consumption
W 600
No-load speed
min
-1
3900
Working width
mm 330
Working width
mm 330
Working depth max.
mm +4,+8,+12
Working depth max.
mm +4,+8,+12
Weight
kg 14
Sound Pressure Level
according to
according to
2000/14/EC
dB (A) 92
Vibration Level according to
EN 60335-1
m/s
2
5
Protection class: II;
Technical and visual changes can be made during the course of the further de-
velopment and without prior notice. All information given in these instructions for
use are therefore given without guarantee. Legal claims, which are based on the
instructions for use can therefore not be made.
ceed towards position 3. Continue to the end of the cutting area,
turn to the left and proceed towards position 4. Continue in the
same manner as shown in Fig. 7.1, always working away from the
cable. Do not adopt the method as shown in Fig. 7.2, working towards the
cable, as this is dangerous practice.
Transport
Attention! Before transporting the tool, switch off the motor.
The tines and the tool as such may be damaged even if you move the tool
with the motor switched off , e.g., over solid ground. Prevent the tines from
touching the ground by carrying the tool by the carrying handle at the guide
bar.
Clearing tines of foreign objects
During operation, a stone or root may become lodged in the tines, or tall
grass or weeds may wrap around the tine shaft.
To clear the tines, release the trigger lever. Unplug the tiller, and dislodge or
remove any obstacles from the tines or tine shaft.
Maintenance and storage
Before carrying out any maintenance operations, cut off the electric power
supply by disconnecting the plug from the extension cable.
Prior to each time the tool is used
•
Check the connecting cable for signs of damage or ageing (wear and tear).
Replace the cable if it is cracked, split or otherwise damaged.
ceed towards position 3. Continue to the end of the cutting area,
7.1
7.2
Содержание EL 600
Страница 2: ......
