The chain lubrication system has been set to its perfect adjustment at the factory.
If it requires adjusting, take the saw to your nearest authorised after-sales service
outlet.
A setting screw for adjusting the chain lubrication (Fig. 17/pos. J) is located on the
underside of the chainsaw. Turning the screw counter-clockwise increases the chain
lubrication, turning it clockwise decreases the chain lubrication.
To check the chain lubrication, hold the chainsaw, with the chain, over a piece of
paper and run it at full speed for a few seconds. You will be able to judge the set
amount of oil from the paper.
CHAIN MAINTENANCE
Chain sharpening
Chain sharpening requires special tools to ensure that cutters are sharpened at
the correct angle and depth. For the inexperienced chainsaw user, we recommend
that the saw chain be professionally sharpened by the nearest professional Service
Centre. If you feel comfortable sharpening your own saw chain, special tools are
available from the professional Service Centre.
Chain sharpening
Sharpen the chain using protective gloves. After sharpening, the cutting links must
all have the same width and length.
m
NOTICE
A sharp chain produces well-defined chips. When your chain starts to produce
sawdust, it is time to sharpen.
After the blades have been sharpened 3-4 times, check the height of the depth
limiter and if necessary lower it with a flat file and then round off the front corner.
AFTER SALES SUPPORT
47
00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc
Maintenance and servicing