SWITCHING OFF THE ENGINE
Emergency Stop procedure:
To stop the engine in an emergency, activate the Chain brake lever / front hand
guard (Fig. 26/pos. 5). This will immediately stop the chain. Then switch the ON/
OFF (Fig. 19/left) switch to '0' Stop.
Normal procedure:
Let go of the throttle lever (Fig. 20/pos. 19) and wait until the engine has changed
to idling speed. Then set the Stop switch (Fig. 19/left) to '0' Stop.
Practice all the work steps with the engine switched off before you start to use the
equipment.
How to remove the chain or chain bar for replacement maintenance &
cleaning
1. Make sure the chain brake lever is pulled back into the
DISENGAGED
position (Fig. 11).
2. Extend the lever on the Bar fastening knob (Fig. 9/pos. 18) & completely un-
screw
COUNTERCLOCKWISE
(Fig. 9).
Then remove the complete side cover.
Complete any necessary replacement of parts, maintenance or cleaning.
(See other pages in this operating instruction guide).
Re-assembly of the chain bar and chain to the engine unit
m
CAUTION
Do not start the engine until the saw is fully assembled.
m
CAUTION
Wear protective gloves at all times when handling the chain.
Fit the chain bar
To ensure that the bar and the chain are supplied with oil,
USE ONLY THE
ORIGINAL BAR
.
The oiling hole (Fig. 4/pos. C) must be kept clear of dirt and any build-up of
residue.
40
AFTER SALES SUPPORT
00800 4003 4003
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Operation
Petrol chainsaw 41cc
