AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: BG-EC 620T, 11/11
8
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual
in a safe place so that the information is available
at all times. If you give the equipment to any other
person, hand over these operating instructions and
safety regulations as well. We cannot accept any
liability for damage or accidents which arise due to a
non-observance of these instructions and the safety
instructions.
Packaging:
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
•
Read the operating instructions carefully and
comply with them. It is important to consult these
instructions in order to acquaint yourself with
the equipment, its proper use and the important
safety regulations.
•
Keep this manual in a safe place so that the
information is available at all times.
•
If you give the equipment to any other person,
give them these operating instructions as well.
We can accept no liability for damage or
accidents which arise due to non-compliance
with these instructions.
General Safety Regulations
1
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
This equipment is not designed to be used by people
(including children) with limited physical, sensory or
mental capacities or those with no experience and/or
knowledge unless they are supervised by a person who
is responsible for their safety or they have received
instructions from such a person in how to use the
equipment safely. Children must always be supervised
in order to ensure that they do not play with the
equipment.
Explanation of the symbols on the machine
(Fig. 19)
1.
Warning!
2.
Protect the equipment from rain and damp.
3.
Watch out for falling and catapulting parts.
4.
Keep your distance.
5.
Read the directions for use before operating the
equipment.
6.
Wear protective headgear, goggles and ear muffs
7.
Wear safety gloves.
8.
Wear sturdy, non-slip footwear.
9.
If the cable is damaged or cut, disconnect the
power plug from the mains immediately.
10. Electric shock can cause fatal injury. Keep a
distance of at least 10 m from power cables.
11. Direction of the chain movement and teeth.
12. Maximum cutting length.
General safety instructions for electric tools
CAUTION: Read all safety regulations and
instructions.
Any failures made in following the
safety regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions in
a safe place for future use.
The term “electric tool” used in the safety instructions
refers to electric tools operated from the mains power
supply (with a power cable) and to battery operated
electric tools (without a power cable).
1. Workplace safety
a)
Keep your work area clean and well
illuminated.
Untidy or unlit work areas can
result in accidents.
b)
Do not operate the electric tool
in an environment where there is a risk of
risk of explosions and where there are
inflammable liquids, gases or
dust. Electric
tools produce sparks which could set the dust or
vapours alight.
c)
Keep the electric tool out of the reach of
children and other persons.
If there is a
distraction, you may lose control of the appliance.
2. Electrical safety
a)
The connector plug from this electric
tool must fit into the socket. The plug
should never be altered in any way. Never
use adapter plugs together with
earthed electric tools.
Unaltered plugs and
correct sockets reduce the risk of an electric shock.
b)
Avoid bodily contact with earthed
surfaces such as pipes, heating, ovens and
fridges.
The risk of electric shock is increased if
your body is earthed.
c)
Keep the tool out of the rain and away
from moisture.
The ingress of water into an
electric tool increases the risk of an electric shock.
