Gardena SILENO R100Li Скачать руководство пользователя страница 75

Страница: 75 / 84

English - 74

TROUBLESHOOTING

Uneven mowing

results

The robotic lawnmower works too

few hours per day.

Increase the working times.

See 6.3 Timer on

page 44.

Not applicable for R100Li, R100LiCThe

SensorControl senses that the lawn has been

mowed more than it actually has. Increase the

intensity level in the SensorControl If this does

not help, turn off the SensorControl.

The shape of the working area

requires manual settings to be made

for the robotic lawnmower to find its

way to all remote areas.

Also use

Lawn coverage

to steer the robotic

lawnmower to one or more remote areas.

See 6.7 Installation on page 51.

Working area too large.

Try limiting the working area or extending the

working time.

See 6.3 Timer on page 44

Blunt blades.

Replace all the blades and screws so that the

rotating parts are balanced.

See 8.6 Blades on

page 66.

Accumulation of grass by the blade

disc or around the motor shaft.

Check that the blade disc skid plate rotates

easily. If not, screw off the blade disc and remove

grass and foreign objects.

See 8.4 Transport and

moving on page 66.

The robotic

lawnmower runs at the

wrong time

The robotic lawnmower clock needs

to be set.

Set the clock.

See 6.8 Settings on page 56.

The start and stop times for mowing

are incorrect.

Reset the start time and stop time settings for

mowing.

See 6.3 Timer on page 44

The robotic

lawnmower vibrates

Damaged blades lead to imbalance

in the cutting system.

Inspect the blades and screws and replace them

if necessary.

See 8.6 Blades on page 66.

Many blades in the same position lead

to imbalance in the cutting system.

Check that only one blade is fitted at each screw.

Different versions (thickness) of

GARDENA blades are used.

Check if the blades are of different versions.

The robotic

lawnmower runs, but

the blade disc does

not rotate

The robotic lawnmower follows

the

guide wire to or

from the charging

station.

This behaviour is normal and no action is

required.

The robotic lawnmower searches for

the guide wire and the battery charge

is very low.

This behaviour is normal and no action is

required.

The robotic

lawnmower mows

for shorter periods

than usual between

charges

Grass or other foreign object blocks

the blade disc.

Remove and clean the blade disc.

See 8.3

Cleaning on page 64.

The battery is spent.

Contact GARDENA Central Service.

See MEMO

on page 2

Both the mowing and

charging times are

shorter than usual

The battery is spent.

1157808,Gardena_R100Li-R130Li,GB_151217.indd 74

2016-01-12 09:17:10

Содержание SILENO R100Li





















































































Результаты поиска

Содержание SILENO R100Li

Отзывы:

Бренды по названию

Популярные бренды

Gardena SILENO R100Li, Руководство оператора

Результаты поиска

Содержание SILENO R100Li

Отзывы:

Бренды по названию

Популярные бренды