Gardena SILENO R100Li Скачать руководство пользователя страница 69

Страница: 69 / 84

English - 68

MAINTENANCE

8.8 Battery

The battery is maintenance-free, but has a limited service

life of 2 to 4 years.
Battery service life is dependent on the length of the

season and how many hours a day the robotic lawnmower

is used. A long season or many hours of use per day

means that the battery must be replaced more regularly.
Only charge the battery in the included charging station.

Always use the original power supply unit. Incorrect use

may result in electric shock, overheating or leaking of

corrosive liquid from the battery. In the event of leakage

of electrolyte flush with water/neutralizing agent, seek

medical help if it comes in contact with the eyes.

IMPORTANT INFORMATION
Do not try to recharge non-rechargeable

batteries.

Replacing battery

If the operating times for the robotic lawnmower are

shorter than normal between charges, it indicates that the

battery is getting old and eventually needs replacing. The

battery is fine as long as the robotic lawnmower maintains

a well-cut lawn.

IMPORTANT INFORMATION
Always use original batteries. Compatibility

with other batteries cannot be guaranteed.

The appliance must be disconnected from

the supply mains when removing the battery.

Set the main switch to position 0.

2. Turn the robotic lawnmower upside down. Place

the robotic lawnmower on a soft and clean surface

to avoid scratching the body and the display cover.

3. Clean around the battery cover.
4. Unscrew the four screws to the battery cover (Torx

20) and remove the battery cover.

5. Carefully lift out the battery and release the

connectors. NOTE! Do not pull the cables. Hold

the connectors and release the latch.

6. Connect a new original battery by pressing the

connectors together until it locks.

7. Place the battery with the sticker “This side down”

downwards in the battery opening.

8. Fit the battery cover without clamping the cables.

If the seal on the battery cover is visibly damaged,

the entire battery cover must be replaced.

9. Carefully cross-tighten the four screws for the

battery cover (Torx 20).

3018-251

1157808,Gardena_R100Li-R130Li,GB_151217.indd 68

2016-01-12 09:17:09

Содержание SILENO R100Li





















































































Результаты поиска

Содержание SILENO R100Li

Отзывы:

Бренды по названию

Популярные бренды

Gardena SILENO R100Li, Руководство оператора

Результаты поиска

Содержание SILENO R100Li

Отзывы:

Бренды по названию

Популярные бренды