![Gardena R70Li Скачать руководство пользователя страница 48](http://html2.mh-extra.com/html/gardena/r70li/r70li_installation-manual_3878500048.webp)
48 - English
6. MENU FUNCTIONS
Test
OUT
The
Test OUT
function is used to test if the selected
Guide width
suits the installation in question and to
calculate the distance from the charging station to a
remote area.
To test the settings in
Remote start 1:
Park the robotic lawnmower in the charging station
and select
Test OUT - Remote start 1
. The robotic
lawnmower will then leave the charging station straight
away along the guide wire and begin mowing after the
designated distance.
If there is a passage that the robotic lawnmower
cannot get through, the settings in
Guide width
ought
to be changed from
Wide
to
Medium
. If required, the
setting can also be changed to
Narrow
. The Narrow
guide width setting should only be used if none of the
other settings work for this installation. When the
Test
OUT
function is activated, the robotic lawnmower
travels the farthest distance from the wire allowed by
the selected guide width.
The figure here shows how the robotic lawnmower
travels through a passage when
Guide width
is set to
Medium
and not to
Wide
.
How to measure the distance from the charging
station to a remote area:
Enter a distance which beyond any doubt exceeds the
real figure. The maximum distance that can be entered
is 500 metres. Park the robotic lawnmower in the
charging station and select
Test OUT
. The robotic
lawnmower will immediately leave the charging station.
The distance, stated in metres, will be shown in the
mower display as the robotic lawnmower operates.
Stop the robotic lawnmower at the required position
and note the distance. Enter the displayed number of
metres in the
Distance
field for the working area in
question.
If
Remote start 2
has been activated, i.e. if another
option other than
Never
has been selected for
Proportion
, these settings must also be tested.
Remote
start 2
test is performed in the same way as for
Remote start 1
.
Test IN
The
Test IN
function allows you to test how well the
robotic lawnmower docks with the charging station.
Test IN
can only be performed after
Test OUT
has
been performed.
Selecting this function causes the robotic lawnmower
to travel directly along the guide wire towards the
charging station and to dock with it. The test is
approved only if the robotic lawnmower is able to dock
with the charging station at the first attempt. If the
robotic lawnmower is unable to dock on the first
attempt, it will automatically try again. The installation
is not approved if the robotic lawnmower needs two or
more attempts to dock with the charging station.
Remote start 1
Remote start 2
Test IN
Test OUT
Содержание R70Li
Страница 1: ...R40Li R70Li INSTALLATION MANUAL GARDENA ROBOTIC LAWNMOWER...
Страница 2: ......
Страница 75: ......