6. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the rotor blades turn or the product
starts accidentally.
v
Remove the battery and wait for the rotor blades to stop
before you troubleshoot the product.
Problem
Possible Cause
Remedy
Blower / vacuum does not start
Battery is not put completely into
the battery holder.
v
Put the battery completely into
the battery holder until it audibly
engages.
On LED is off.
v
Push the On/Off button.
Blower / vacuum vibrates
abnormally
Mechanical failure.
v
Contact the GARDENA
Service.
Error-LED
ç
on
the control panel
flashes
ç
Over current, engine is blocked.
v
Remove the battery and remove
the obstacle.
Blower tube, vacuum tube,
collection bag or intake cover is
not assembled correctly.
v
Assemble all parts until the
interlock audibly engage.
Abnormal speed.
v
If there is no blockage and the
parts are correctly assembled,
contact the GARDENA Service.
Error-LED
¥
on the battery
flashes
ß
Wb
Under voltage.
v
Charge the battery.
Battery temperature is out of
range.
v
Use the battery in surroundings
where temperatures are
between – 10 °C and 40 °C.
Error-LED
¥
on the battery
illuminates
Battery error / battery defective.
v
Contact the GARDENA Service.
Charging control lamp
å
on the
charger does not illuminate
ß
Wc
ß
Lc
Battery charger or charging cable
are not connected correctly.
v
Connect the battery charger
and charging cable correctly.
Charging control lamp
å
on
the charger flashes rapidly
(4 times per second)
Battery temperature is out of
range.
v
Use the battery in surroundings
where temperatures are
between – 10 °C and 40 °C.
Error-LED
≈
on the charger
flashes
Battery error.
v
Remove the battery and
check that you use an original
GARDENA battery.
Error-LED
≈
on the charger
illuminates
Temperature inside the charger
is too high.
v
Contact the GARDENA service.
23
EN
