Gardena powerCut 2404, Руководство по эксплуатации

Страница: 4 / 12

Filament feed (Tip mechanism
for automatic filament feed) :
11
GB
Connecting the Turbotrimmer :
Setting the Turbotrimmer
to the working position :
1. Push the extension cable
1
into
the cable lock
2
on the handle
3
.
2. Plug the plug
4
of the Turbo-
trimmer into the socket
5
of the
extension cable.
Working position :
Position the additional handle
6
so that the cutting head
7
is
tilted slightly forward when you hold the Turbotrimmer in the
working position.
1. Unscrew the tightening nut
8
,
move the additional handle
6
to the correct position and tighten
the nut
8
by hand.
2. Unscrew the adjusting nut
9
,
set the additional handle
6
to
the correct angle and tighten
the adjusting nut
9
by hand.
3. Unscrew the tightening nut
0
,
adjust the handle
A
to the
correct length and tighten the
nut
0
by hand.
4. Press and hold down the adjusting
button
B
, set the cutting head
7
to the correct angle, then release the adjusting button
B
.
1. Press the start button
C
on the handle
3
.
The Turbotrimmer starts.
2. Release the start button
C
on the handle
3
.
The Turbotrimmer switches off.
1. For vertical cutting, loosen the tighten-
ing nut
8
, turn the additional handle
6
180 ° and then tighten the nut
8
again
by hand.
2. Swivel the plant guard
D
backwards to
the park position until it clicks into place.
3. Lift the Turbotrimmer by the handle
3
and additional handle
6
and turn to the
cutting position.
4. When trimming between paving stones,
hold the Turbotrimmer so that the cutting
filament moves slightly above the paved
ground.
The filament is lengthened automatically when the motor is
running using a tip mechanism. A clean cut is only achieved
with the maximum filament length.
3
2
2
1
4
5
6
7
6
B
9
8
A
0
Starting your Turbotrimmer :
Trimming along lawn edges
and in awkward places :
3
C
Cutting
position
Park
position
D
D
6
8
3