Gardena Flymo 1200R Скачать руководство пользователя

Страница: 23 / 48

3.14.2.2 PIN request
This function means that the robotic lawnmower

requests a PIN code when the main switch is set to

and each time the hatch is opened. The correct PIN

code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession

the robotic lawnmower is blocked for a time. The

blockage time is extended for every new incorrect

attempt.
3.14.2.3 Alarm
This function means that an alarm sounds if the PIN

code is not entered within 10 seconds after the STOP

button has been pressed or the robotic lawnmower has

been lifted up for any reason. A ticking noise indicates

that the PIN code must be entered to prevent triggering

the alarm. The alarm can be turned off at any time by

entering the correct PIN code.

3.14.3 New loop signal

The loop signal is randomly selected to create a unique

link between the robotic lawnmower and the charging

station. In rare cases, there may be a need to generate

a new signal, for instance if two adjacent installations

have a very similar signal.
1. Place the robotic lawnmower in the charging station.
2. Select

New loop signal in the menu.

3. Press

OK and await confirmation that the loop signal

has been generated. This normally takes about 10

seconds.

3.15 Settings

SETTINGS

ECO mode

Time & Date

Language

Country

Reset user settings

About

Remote start

Backlight

Calibrate guide

3.15.1 ECO mode

This function automatically turns off the loop signal in

the boundary loop, the guide wires and the charging

station when the robotic lawnmower is not mowing, i.e.

when the lawnmower is charging or is not allowed to

mow due to timer settings.
The

ECO mode is suitable to use where there is other

wireless equipment not compatible with the robotic

lawnmower e.g.certain hearing loops or garage doors.

When

ECO mode is activated, the indicator lamp in the

charging station flashes green.

ECO mode means that

the robotic lawnmower can only be started in the

charging station and not out in the working area.
In

ECO mode, it is very important to always press the

STOP button before removing the robotic lawnmower

from the charging station. It is otherwise not possible to

start the robotic lawnmower. If the lawnmower has been

removed by mistake without first pressing the STOP

button, the lawnmower must be placed back in the

charging station and the STOP button pressed. Only

then can the robotic lawnmower be started inside the

working area.
Select

RUN ECO mode and press OK to activate ECO

mode.

Note: Always press the STOP button before removing

the robotic lawnmower from the charging station. In

ECO mode the robotic lawnmower otherwise will not be

started inside the working area.

3.15.2 Time & Date

This function allows you to set current time and required

time format in the robotic lawnmower.

Time & Date

Set time

Set date

Time format

Date format

•

Set time: Enter the correct time and press OK to

exit.

•

Set date: Enter correct date and press OK to exit.

•

Time format: Place the cursor at the required time

format: 12h 24h. Press

OK to exit.

•

Date format: Place the cursor at the required date

format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
Exit by pressing

OK.

3.15.3 Language

Set language with this function.
To select language: Place the cursor at the required

language and press

OK.

3.15.4 Country

With this function you can select in what country the

robotic lawnmower will work.
Place the cursor at the required country and press

OK.

365 - 001 -

Installation - 23

Содержание Flymo 1200R

















































Результаты поиска

Содержание Flymo 1200R

Отзывы:

Похожие инструкции для Flymo 1200R

Бренды по названию

Популярные бренды

Gardena Flymo 1200R, Руководство оператора

Результаты поиска

Содержание Flymo 1200R

Отзывы:

Похожие инструкции для Flymo 1200R

Бренды по названию

Популярные бренды