seen as indicative. They may need to be adjusted to suit
the garden and for example grass quality and growth
during the season. Use the table as follows:
•
Find a work area that closest matches the size of the
lawn.
•
Select an appropriate amount of work days per week
(for some work areas 7 days may be needed).
•
Work hours per day shows how many hours a day
the robotic lawnmower will be allowed to work for the
selected amount of work days.
•
Suggested time interval shows a time interval that
corresponds to the required work hours per day.
3.13.1 Timer suggestions
Flymo 1200R
Work area
Work days per week
Work hours per day
Suggested time interval
100 m
2
5
4.5
07:00 - 11:30
7
3
07:00 - 10:00
200 m
2
5
8.5
07:00 - 15:30
7
6
07:00 - 13:00
300 m
2
6
10.5
07:00 - 17:30
7
9
07:00 - 16:00
400 m
2
7
12
07:00 - 19:00
3.13.2 To set the timer
•
Work hours 1: To set start and stop times for Work
hours 1, enter each required time in hours and
minutes and press
OK to confirm the entered time.
•
Work hours 2: To set start and stop times for Work
hours 2, enter each required time in hours and
minutes and press
OK to confirm the entered time.
•
Work days: To select the days the robotic
lawnmower must work, tick off the days the robotic
lawnmower will work
•
Reset timer: To reset values to the factory settings,
select the
Reset timer and press OK.
To inactivate
Work hours 1 or Work hours 2, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--.
A clock symbol is displayed on the start page when the
timer settings are set. The clock symbol is black when
the robotic lawnmower is not allowed to mow due to a
timer setting.
3.14 Security
Through this selection, settings relating to security and
the connection between the mower and the charging
station can be made.
SECURITY
Change PIN code
Security level
New loop signal
3.14.1 Change PIN code
Enter the new PIN code and press
OK. Enter the same
code again and confirm by pressing
OK. When the PIN
code is changed, the message
PIN code changed
appears in the display.
Make a note of the new PIN code on the designated line
on the
MEMO. See Introduction on page 3
3.14.2 Security level
There are 3 security levels to choose from.
Security level
Low
Medium
High
Low and Medium security prohibits access to the robotic
lawnmower if the PIN code is unknown.
High security
also includes a warning that beeps if the correct PIN
code is not entered after a designated time period.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
Function
Low
Medium
High
Time lock
X
X
X
PIN request
X
X
Alarm
X
3.14.2.1 Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without first entering the correct
PIN code. When the 30 days has passed the robotic
lawnmower will continue to mow as normal, but the
Enter PIN code message appears when the hatch is
opened. Enter your code again and press
OK.
22 - Installation
365 - 001 -
