background image

General Power Tool Safety Warnings

 WARNING! Read all safety warnings 

and all instructions.  

Failure to follow the warnings and 

 instructions may result in electric shock, 

fire and / or serious injury.

Save all warnings and instructions for future 

reference.  

The term “power tool” in the warnings refers  

to your mains operated (corded) power tool or 

 battery operated (cordless) power tool.

1) Work area safety
a)   Keep work area clean and well lit.  

Cluttered or dark areas invite accidents.

b)   Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust.  

Power tools create sparks which may ignite the 

dust or fumes.

c)   Keep children and bystanders away while 

operating a power tool.  

Distractions can cause you to lose control.

2) Electrical safety
a)   Power tool plugs must match the outlet. 

Never modify the plug in any way. Do not 

use any adaptor plugs with earthed 

(grounded) power tools.  

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

b)   Avoid body contact with earthed or 

grounded surfaces, such as pipes, 

 radiators, ranges and refrigerators.  

There is an increased risk of electric shock if 

your body is earthed or grounded. 

c)   Do not expose power tools to rain or  

wet conditions. Water entering a power tool 

will  increase the risk of electric shock.

d)   Do not abuse the cord. Never use the cord 

for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, 

sharp edges or moving parts.  

Damaged or entangled cords increase the risk 

of electric shock.

e)   When operating a power tool outdoors, use 

an extension cord suitable for outdoor use. 

Use of a cord suitable for outdoor use reduces 

the risk of electric shock.

f)   If operating a power tool in a damp loca-

tion is unavoidable, use a residual current 

device (RCD) protected supply.  

Use of an RCD reduces the risk of electric 

shock.

3) Personal safety
a)   Stay alert, watch what you are doing and 

use common sense when operating a 

power tool. Do not use a power tool while 

you are tired or under the influence of 

drugs, alcohol or medication.  

A moment of inattention while operating power 

tools may result in serious personal injury.

b)   Use personal protective equipment. Always 

wear eye protection. Protective equipment 

such as dust mask,  non-skid safety shoes, hard 

hat, or hearing  protection used for appropriate 

conditions will reduce personal injuries.

c)   Prevent unintentional starting. Ensure the 

switch is in the off-position before con-

necting to power source and / or battery 

pack, picking up or carrying the tool. 

 Carrying power tools with your finger on the 

switch or energising power tools that have  

the switch on invites accidents.

d)   Remove any adjusting key or wrench 

before turning the power tool on. A wrench 

or a key left attached to a rotating part of the 

power tools may result in personal injury.

e)   Do not overreach. Keep proper footing and 

balance at all times. This enables better con-

trol of the power tool in unexpected situations.

f)   Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing and 

gloves away from moving parts.  

Loose clothes, jewellery or long hair can be 

caught in moving parts.

g)   If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used. Use of dust collection can reduce dust-

related hazards.

4) Power tool use and care
a)   Do not force the power tool. Use the cor-

rect power tool for your application.  

The correct power tool will do the job better and 

safer at the rate for which it was designed.

b)   Do not use the power tool if the switch 

does not turn it on and off.  

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

c)   Disconnect the plug from the power 

source and / or the battery pack from the 

power tool before making any adjust-

ments, changing accessories, or storing 

power tools.  

Such preventive safety measures reduce the 

risk of starting the power tool accidentally.

3

GB

Содержание EasyCut 500/55















Отзывы: