18
GB
Fault Possible cause Remedy
The Turbotrimmer
Filament worn or too short.
v
Lengthen the filament –
no longer cuts
see 4. Operation
“Filament
feed (Tip mechanism for
automatic filament feed
)”.
Filament cassette empty.
v
Replace the filament cassette
– see 6. Maintenance
“Replacing the filament
cassette”
).
Filament drawn into the
v
Pull the filament out of the
cassette or stuck together. filament cassette (see above).
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
8. Accessories
GARDENA Replacement
Art. No. 5307
Filament Cassette
GARDENA
for EasyCut 400 / 480
Art. No. 5310
Additional wheel
9. Technical Data
Turbotrimmer
EasyCut 400 EasyCut 480 ComfortCut 450 PowerCut 500
(Art. 8846) (Art. 8846-40) (Art. 8847) (Art. 8848)
Motor power consumption
400 W 480 W 450 W 500 W
Mains voltage /
230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
mains frequency
Filament thickness
1.6 mm 1.6 mm 1.6 mm 1.6 mm
Cutting width
250 mm 250 mm 250 mm 270 mm
Filament supply
6 m 6 m 6 m 6 m
Filament feed
Tipp-Automatik Tipp-Automatik Tipp-Automatik Tipp-Automatik
Weight
ca. 2.4 kg ca. 2.4 kg ca. 2.8 kg ca. 3.0 kg
Rpm of filament cassette
ca. ca. ca. ca.
12,700 U / min 12,700 U / min 12,700 U / min 12,300 U / min
Work area related emission
85 dB (A) 85 dB (A) 85 dB (A) 85 dB (A)
characteristic value L
pA
1)
Noise level L
WA
2)
measured measured measured measured
95 dB (A) 95 dB (A) 95 dB (A) 95 dB (A)
guaranteed guaranteed guaranteed guaranteed
96 dB (A) 96 dB (A) 96 dB (A) 96 dB (A)
Hand / arm vibration a
vhw
1)
< 2.5 m / s
2
< 2.5 m / s
2
< 2.5 m / s
2
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
