![Gardena EasyCut 110/18VP4A Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/gardena/easycut-110-18vp4a/easycut-110-18vp4a_operators-manual_3684357014.webp)
4.2.2 To clean the battery charger:
v
Clean the contacts and the plastic parts with a soft and dry cloth.
5. STORAGE
5.1 To put into storage:
The product must be stored away from children.
1. Remove the battery.
2. Slide the protective cover over the blade.
3. Charge the battery.
4. Clean the lopper, the battery and the battery charger
(see 4. MAINTENANCE).
5. Store the lopper, the battery and the battery charger in a dry, enclosed
and frost-free place.
6. TROUBLESHOOTING
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v
Use gloves.
v
Remove the battery.
v
Slide the protective cover over the blade.
6.1 Troubleshooting table:
Problem
Possible Cause
Remedy
Start lever cannot
be pushed
Start lever is stuck.
v
Loosen the start lever.
Lopper does not start
or stops.
LED
(L1)
blinks green
[ Fig. O4 ]
Battery is empty.
v
Charge the battery.
Lopper does not start
or stops.
Error-LED
(Wp)
lights red
[ Fig. O4 ]
Battery temperature is outside
the permissible temperature
range.
v
Wait until the battery
temperature is between
0 °C – 35 °C again.
There are drops of water or
moisture between the battery
contacts.
v
Remove the water drops or
moisture with a dry cloth.
Obstacle blocks the motor.
v
Remove the obstacle.
Lopper does not start
or stops.
Error-LED
(Wp)
blinks red
[ Fig. O4 ]
Lopper is defective.
v
Contact the GARDENA
Service.
Lopper does not start
or stops.
Error-LED
(Wp)
does not
light [ Fig. O4 ]
Battery is not put completely
into the battery holder.
v
Put the battery completely
into the battery holder until
it audibly engages.
Battery is defective.
v
Replace the battery.
Lopper is defective.
v
Contact the GARDENA Service.
Charging is not possible.
Battery charge indicator
(Lc)
lights continuously green
[ Fig. O3 ]
Battery is not slid onto the
charger correctly.
v
Slide the battery onto the
charger correctly.
Battery contacts are dirty.
v
Clean the battery contacts
(e. g. by connecting and dis-
connecting the battery several
times. Replace the battery if
necessary.
Battery temperature is outside
the permissible temperature
range.
v
Wait until the battery
temperature is between
0 °C – + 35 °C again.
Battery is defective.
v
Replace the battery.
Charging is not possible.
Battery charge indicator
(Lc)
does not light
[ Fig. O3 ]
Mains plug of the charger is
not plugged in correctly.
v
Insert the mains plug com-
pletely into the mains socket.
Mains socket, mains cable or
charger is defective.
v
Check the mains voltage.
Let the charger be checked
if necessary by an authorised
specialist dealer or the
GARDENA Service.
NOTE:
Repairs must only be done by the GARDENA service departments or
specialist dealers approved by GARDENA.
v
For any other malfunctions please contact the GARDENA service
department.
7. TECHNICAL DATA
Lopper
Unit
Value
(Art. 14772)
Value
(Art. 14774)
Value
(Art. 14776)
Max. branch diameter
mm
28
28
28
Max. cuts per battery charge
PBA 18V 2.0Ah W-B
PBA 18V 2.5Ah W-B
PBA 18V 3.0Ah W-B
PBA 18V 4.0Ah W-C
PBA 18V 5.0Ah W-C
PBA 18V 6.0Ah W-C
400
500
600
800
1000
1200
400
500
600
800
1000
1200
400
500
600
800
1000
1200
Range of extension of
the telescopic tube
cm
–
215 – 255
320 – 360
Max. Height (with telescopic
tube extended)
cm
110
255
360
Weight (without Battery)
kg
1.9
3.4
4.1
Sound pressure level L
pA
1)
Uncertainty k
pA
dB (A)
65
3
63
3
57
3
Sound power level L
WA
2)
:
measured/guaranteed
Uncertainty k
WA
dB (A)
76 / 79
3
77 / 80
3
77 / 80
3
Hand/arm vibration a
vhw
1)
Uncertainty k
vhw
m/s
2
≤ 2.5
1.5
≤ 2.5
1.5
≤ 2.5
1.5
Measuring process complying with:
1)
EN IEC 62841-4-2
2)
RL 2000/14/EC / S.I. 2001/1701
NOTE: The stated vibration emission value has been measured according to
a standardised test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the electric power
tool depending on the ways in which the machine is used. As a safety measure, you
should work with the machine for a maximum of 1 hour without interruption.
System Battery
PBA 18V 2.0Ah W-B
Unit
Value (Art. 14902)
Battery voltage
V (DC)
18
Battery capacity
Ah
2.0
Number of cells (Li-Ion)
5
Appropriate POWER FOR ALL
system Battery Chargers
AL 1810 CV / AL 1815 CV / AL 18V-20 /
AL 1830 CV / AL 1880 CV
Battery Charger
AL 1810 CV P4A
Unit
Value (Art. 14900)
Mains voltage
V (AC)
220 – 240
Mains frequency
Hz
50 – 60
Rated power
W
26
Battery charging voltage
V (DC)
18
Max. battery charging
current
mA
1000
Battery charging time
(approx.)
PBA 18V 2,0Ah W-B
PBA 18V 2,5Ah W-B
PBA 18V 4,0Ah W-C
min.
min.
min.
115
136
228
Permitted charging
temperature range
°C
0 – 35
Weight according to
EPTA-Procedure 01:2014
kg
0.17
Protection class
/ II
Appropriate POWER FOR ALL
system Batteries
PBA 18V
8. ACCESSORIES / SPARE PARTS
GARDENA Extension tube
To extend Art. 14774 or as
a replacement.
Art. 14772-20.630.00
available via GARDENA
Service
en
14
14772-20.960.01.indd 14
14772-20.960.01.indd 14
01.09.22 09:14
01.09.22 09:14