7. [ Fig. O13 ]: Select the minutes for watering
duration using the
▲
-
▼
keys (e. g.
20
20
minutes)
and confirm by pressing the OK key.
24 h blinkt.
Setting the watering cycle / watering days:
a) Watering cycle:
Watering options are every 24 hours “24h”,
every second day “2nd”, every third day “3rd”,
every “Odd” day odd or every even day
“Even”.
b) Watering days:
Every day Mo, Tu, We, Th, Fr, Sa, Su can be
individually set.
8. a) [ Fig. O14 ]: Watering cycle:
Using the
▲
-
▼
keys, select the desired watering
cycle (e. g. 2nd = every 2nd day) and confirm
by pressing the OK key.
The watering cycle (e. g. 2nd ) and the preview
for the week (e. g. Su , Tu , Th , Sa ) are
shown on the display in frames.
The days in the preview for the week are
always with respect to the day of the week set
in the system (e. g. Sunday Su).
– or –
b) [ Fig. O15 ]: Watering days:
Using the
▲
-
▼
keys, select the desired day
of the week (e. g. Mo = Monday) and select /
deselect the day by pressing the OK key.
The selected watering days (e. g. Mo, We, Fr )
are shown on the display in frames.
9. [ Fig. O16 ]: Press the Channel key and set up
more watering programs.
The program is saved and
SELECT CHANNEL
SELECT CHANNEL
and
the channel flash (program step 1.).
10. [ Fig. O17 ]: Press the Channel key.
The programs have been set up and the main
level is displayed.
The main level displays the next programmed
watering. In this example: watering on 2
(Channel 2 ), watering start time 16:30
(Start Time
16:30
16:30
) on Monday ( Mo ).
Programming of the Watering Controller is now
completed, i. e. the valves installed open / close
entirely automatically and therefore water at the
programmed times.
Changing an existing watering program:
You can change an existing program stored in
one of the 3 program memory locations without
having to create the program from scratch.
The data for the watering start time, duration, and
cycle are preset; therefore you only need to change
the specific values of the watering program you
want to change. You can transfer all other values
from Setting the watering programs by pressing
the OK key.
4.2. Special Functions
Blocking a channel:
If Program Off is selected as program memory
location for a channel, the respective channel is
blocked and the watering programs of the chan-
nel are no longer executed. The programs of the
channel are retained.
You can end the programming mode at any time by
pressing the Channel key.
1. [ Fig. O7 ]: Press the Channel key.
SELECT CHANNEL
SELECT CHANNEL
and the channel flash.
2. [ Fig. O8 ]: Select the channel using the
▲
-
▼
keys (e. g. channel 2) and confirm by
pressing the OK key.
Channel appears on the display (e. g. 2) and
Select Program and the program memory
location flash.
3. [ Fig. O18 ]: Select the program memory
location Off using the
▲
-
▼
keys and confirm
by pressing the OK key.
SELECT CHANNEL
SELECT CHANNEL
flashes in the display.
4. [ Fig. O19 ]: Press the Channel key.
CHANNEL OFF
CHANNEL OFF
and the channel (e. g. channel 2) is
shown in the display.
If several channels are blocked,
CHANNELS OFF
CHANNELS OFF
is
displayed. If the Run Time % is not equal to 100,
the display alternates every 3 seconds between
CHANNEL OFF
CHANNEL OFF
and
RUN TIME %
RUN TIME %
.
Manual Watering (Man Key)
Manual watering:
The manual watering duration can be set between
0 to 59 min. Channels which are already open are
displayed in frames.
1. [ Fig. O7 ]: Press the Man. key.
SELECT CHANNEL
SELECT CHANNEL
and the channel flash.
2. [ Fig. O20 ]: Select the channel desired using
the
▲
-
▼
keys (e. g. channel 4) and confirm by
pressing the OK key.
Run Time Man. and minutes flash in the display.
3. [ Fig. O21 ]: Select the manual watering duration
(
00:30
00:30
minutes are preset) using the
▲
-
▼
keys
(e. g.
00:15
00:15
) and confirm by pressing the OK key.
Manual watering starts and the frame around the
active channel flashes.
If the watering duration is not confirmed within
10 seconds by pressing the OK key, the watering
begins with the watering duration selected.
17
EN
