Step 2 - Trampoline Mat (Bed) Assembly
Take care when attaching the springs to the trampoline mat. You will need 2 people to complete this
part of the assembly. ATTENTION when attaching the springs, the connector points can pinch as the
trampoline mat stretches the springs and tightens.
1.
Lay out the trampoline mat (part 1) inside the ready built frame (the white cross and safety labels
should be facing upwards)
2. How to use the spring tool:
Step 1: Position the spring on the edge of the jumping mat (select your spring type A or B). Attach
tool and link up to the spring hook with the hook end of the tool.
Step 2: Pull the tool and attach the spring hook up to the frame. (see below)
Spring
A
Spring
B