PP600F/602F LED lighting controllers - User Manual
Use the
p
and
q
buttons to select the required
pulse width in milliseconds.
Note:
Refer to:
Section 9.3.5, Setting numeric
.
Press
SELECT
.
dONE
is displayed for one second.
The PP600F is ready to pulse the output on a
trigger.
Note 1:
When setting up a PP600F controller, pulsing on output channel 1
can only be triggered from INPUT1, and pulsing on output channel 2 can
only be triggered from INPUT2.
When the lights are pulsed, the display shows that a trigger has occurred
as follows:
—
29
—
