PP600F/602F LED lighting controllers - User Manual
Note that the delay is dependent on the voltage of the trigger signal (on
input 1 or input 2). A lower trigger input voltage gives a longer delay. The
values above apply for a trigger input voltage of 18V to 24V. As with the
standard range of controllers, a trigger input of only 5V will increase the
delay by approximately 8µs.
After a trigger occurs, the PP600F controller halts all other operations
during the pulse delay and pulse width periods. This means that if both
inputs are triggered simultaneously, the output from one trigger is delayed
until the other has finished. Also, changes in selected mode may be
delayed while a pulse occurs.
—
38
—
