Garaventa Super-Trac TRE-52, Руководство пользователя

Страница: 11 / 46

4 Component Function
5
KEY SWITCH
The key switch on the control panel is
used to turn the power ON or OFF.
When the Super-Trac is not in use
(when it is in storage, being recharged
or in transit) put the key switch in the
Ο FF position ( Ο ), remove the key and
keep it in a safe place.
BATTERY LIFE TIP
If the key switch is left in the ON
position, the battery will discharge and
will eventually go dead. When not in
use, always put the key switch in the
Ο FF position and remove the key.
PLATFORM TILT SWITCH
The platform of the Super-Trac must be tilted
so it is horizontal when going up or down
stairs. The tilting is done by a hydraulic
actuator that is activated by a rocker switch on
the control panel. This is the Platform Tilt
Switch.
Press and hold the top of the rocker switch to
tilt the platform back and the bottom of the
rocker switch to return the platform to the
horizontal position.
The platform will stop moving when you take
your finger off the switch or when it reaches
the maximum travel. The hydraulic actuator
will make a louder noise when this happens.
This is normal.
The Super-Trac will not climb up or down
stairs unless the platform is tilted as far as it
can go. Also, this switch will not work while
the Super-Trac is on the stairs.
There is a safety interlock.