background image

 

 

 

Description of Controls 

 

Call Stations 

 

1)  Keyless Call Stations (Standard) 

All standard call stations are keyless and are operational whenever the 
platform controls are not in use. 

  

Keyed Call Stations (Optional) 

Keyed call stations restrict the use of the lift to authorized persons only. 
The call stations will not work unless an ADA compliant key is inserted 
and the key switch is turned on. 

 

2)  Rocker Switches (Standard)  

The standard call station has a constant pressure directional rocker 
switch, that is used to call or send the platform. To call or send the 
platform up, depress and hold the upper portion of the switch. To call or 
send the platform down, depress and hold the lower portion of the switch. 
When the platform reaches the desired landing the lift will automatically 
stop. 

Illuminated Push Button Style Directional Switches (Optional) 

To use the illuminated call station buttons simply depress and hold the 

applicable arrow to call or send the platform.  
 

3)  “In Use” Indication Lamp (Optional)   

The “In-Use” Indicator lamp serves to let you know when the 
lift is occupied. It will be lit while the lift is traveling or while 
someone is entering or exiting the lift. 
 

4)  Service Key Switch 

The key switch is strictly for use by authorized Garaventa 
service representatives only. 
 

5)  Door Interlock Emergency Access Hole (Power Lock 

2000) 

The hole provides access to the door interlock, so that the 
enclosure door may be opened manually using the special 
interlock tool, in the event of a power failure or electrical 

malfunction  

When the interlock is opened manually, the safety 
mechanisms of the lift are over ridden. Extra care should 
be taken and no one should ever position themselves or 
any part of their body under the platform at any time. 

 

 

 

Genesis Vertical Lift Owners Manual  

       Page 4 

Item#11301-H-OM 

 

Содержание Genesis Series



























































Отзывы: