Garage Smart myLIFTER, Инструкция по установке и эксплуатации

Страница: 31 / 31

An alert opens asking, "Are you sure you want to set the smart lifters as level at
this position?"
8. Tap SET .
9. The newly created group is added to the Home screen.
10. Tap the name of the group to open it in the Device Control screen.
11. Lift and lower the grouped lifters using the controls on the Device Control
screen.
To create a Flex Group:
1. On the Home screen, tap Create Group in the lower left-hand corner.
2. On the Create Group screen, tap Flex Group .
3. Enter a name for the group and select the lifters that you want to add to this
group.
4. Tap Save .
The Home screen is displayed with the name of your newly created flex group
on it. In addition, the names of the lifters you added to the flex group are listed on
the
Home screen so you can still control them individually.
5. Tap the name of the flex group to open it on the Device Control screen.
6. Lift and lower the grouped lifters using the controls on the Device Control
screen.