18
Figure 22
3.8.3 Reboot System
Choose menu“System
Reboot”, then click Reboot button to reset the device.
11.2
Upgrade and parameter Leading in and out
Equipment in use process may be due to special needs or problems need to upgrade
version. Sometimes need parameter of equipment import and export.Choose the menu
System==
》
System management into version upgrades and parameters of the import and
export of the page,Shown as Figure 23,The firmware part is to upgrade the software version,
import and export of parameter configuration section.
Choose the menu System→Backup/Restore to load the following page.
The following items are displayed on this screen:
► Backup Current Configurations: Save current parameters as customer default
parameters.
► Load Default Configurations: To reset to customer default parameters.
► Restore Factory Configurations: To reset to factory parameters.
Figure 23 version upgrade & import and export of parameter configuration section
11.3
Equipment inner packet capture and Ping
Choose menu “System Diagnostic Ping”, and then you can use Ping function to check
connectivity
