17
Click the Save button when finished.
Click Refresh button to refresh the web page.
Figure 21 SNMP management configuration
11.Equipment Maintenance
11.1
Reboot and Apply
If you modify the equipment IP address, the new IP address will take effect after restart
the device, other configuration parameters just click the application can take effect. As shown
in figure 22.3.8.2.1 Application
Firmware upgrade via WEB interface is available. There are 2 steps to complete
firmware updating.
1) Choose menu “System Upgrade”, then select the right firmware file, click Upgrade,
wait a
few minutes for firmware downloading and programming.
2) Choose menu “System
Reboot”, then click Reboot button to reset the device.
