Ganz ZN-DNT352XE-MIR, Руководство по установке

Страница: 9 / 23

01A.01 9
4.2. Setting the Lens Position
Instruction below describes how to set the lens positions and manually adjust zoom and focus.
1) Remove the dome cover.
2) Set the lens position by rotating the camera gimbal; to pan, rotate the reinforced lower
body of the gimbal; to tilt, vertically adjust the camera gimbal.
Caution
!
Refrain from continuously rotating the camera gimbal with excessive force to a
single direction as it is attached with the IR-LED cable inside the dome.
3) The figure and table below explains the lens switch settings.
4.3. Setting the Image Attribute
Through the camera ’ s webpage, users can configure image settings.
The camera image ’ s brightness, contrast, saturation and sharpness are adjustable through the
image settings. ( Setup > Video & Audio > Camera) .
C. Tilt the lens by vertically
adjusting the camera gimbal
B. To pan, rotate the lower
body of the camera gimbal A. To adjust lens position,
rotate the camera gimbal
SW1 SW2 SW3
PAL/NTSC TELE WIDE
SW4 SW5 SW6
FAR NEAR
Auto-
Focus