Ganz ZN-CM1, Руководство пользователя

Страница: 27 / 40

27
11. Network
11.1 Network > IP Setup
Network Settings
Click the Setup > Network > IP Setup to see the current network settings.
IP Address Configuration
The GANZ ZN-Cx supports both IP version 4 and IP version 6 (IPv6 will be supported in
V3.00) . Both versions may be enabled simultaneously, and at least one version should be
always enabled.
When using IPv4, the IP address could be set automatically via DHCP, or a static IP
address could be set manually.
If IPv6 is enabled, your camera receives an IP address according to the configuration in
the network router.
There are also options for setting up notification of changes in the IP address, and for
using a Dynamic DNS Service
Notes: • To receive notification whenever the camera’s IP address changes (via e.g.
DHCP), configure the options for notification of IP address change. See
Services below. • If your DHCP server could update a DNS server, you could
access the GANZ ZN-Cx by a host name which is always the same,
regardless of the IP address.
Options for notification of IP address change - DHCP is a protocol for automatic IP address
assignment on a network. IP address assignment via DHCP may lead to the situation
where the IP address changes and you lose contact with the camera. Configure the
options for notification of IP address change (under Services) to receive notification from
the camera when the IP address changes.
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on
your network.
• Primary DNS server - enter the IP address of the primary DNS server.
• Secondary DNS server - will be used if the primary DNS server is unavailable.