Ganz ZN-B1MTP, Руководство пользователя

Страница: 12 / 50

PixelPro Series
ZN-BxMTP Series
User’s Manual
10-2014-A
12
2.2 Accessing the camera from the Internet
Once installed, the camera is accessible on the local network (LAN). Configure the
router/firewall to allow incoming data traffic to access the camera from the Internet. For
security reasons this is usually done on a specific port. Please refer to the
documentation for router/firewall for further instructions.
2.3 Adjusting the Image and Focus
To adjust the position of the lens:
1. Open the
Live View page in your web browser.
- Select the Setup tab, and open the Analog output page.
- S
elect the ‘Video Format' or “ON”.
2. Connect analog monitor to the VIDEO OUT (BNC) on the supplied cable after
connected the supplied Video monitor cable with video output connector.
- Control the ZOOM/FOCUS by the Lens Adjustment window, and adjust the camera
angle.
For lens adjustment method, please refer to
“5.2.5 Lens Adjustment”.
3. Check the image from the
Live View page on your web browser.
4. You can refocus adjustment by Lens Adjustment window, if you want fine lens
adjustment.
2.4 The Live View page
Enable/Disable PC Speaker output
Enable/Disable PC Microphone input
Digital Zoom
Snap Shot
Full Screen
Video Stream change: First stream

Second stream
Play: Click this button by manually to start the stream
Stop: Click this button by manually to stop streaming
NOTE: It is possible that not all the buttons described below will be visible unless the
Live View page has been customized to display them.