6
VIDEO
OUT
VIDEO IN
: BNC plug
Monitor TV
VIDEO
OUT
VIDEO IN
Monitor TV
To AC mains
To 24 VAC or 12 VDC
ZC-Y20PH4
ZC-Y20PH3
⑩
Video output terminal
⑩
Video output terminal
5. INSTALLATION
1. Mount the optional camera mounting bracket to the ceiling or wall. The bracket must be fixed securely
using an electrical box and screws supplied with the bracket. When securing, be sure to run the coaxial
cable through the hole in the bracket.
2. Rotating the bracket's pedestal, fully insert it into the threaded hole in the mount
⑨
.
3. Set the camera's direction, then fix the camera by rotating the lock lever.
Note
The mount can be installed on either the top panel or bottom panel of the camera, and is installed on the
bottom panel by the factory. When changing the position, first remove the mount from the camera and
reattach it to the top panel, then fix it to the mounting bracket.
6. CONNECTIONS
Connect the camera's video output terminal
⑩
to the monitor, etc.
[Ceiling Mounting Example]
[Wall Mounting Example]
⑨
Mount
Camera mounting
bracket (optional)
Lock lever
Ceiling surface
Pedestal
⑨
Mount
Camera mounting
bracket (optional)
Lock lever
Pedestal
Wall
surface
Wall
surface
Camera mounting
bracket (optional)
