Ganz ZC-PT series, Руководство по установке

Страница: 70 / 76

Installation Guide
69
6.2 Using Phillips Allegiant Keyboard
The PTZ Camera can be integrated into Philips Allegiant systems through D77R3
repeaters. Please follow the instructions to control the cmera through Philips
Allegiant systems.
Symbol Definition
<shot> Command dome cameras to go to specific preset position.
<set> Set preset position.
Open the OSD
<ON> + <4 6> + <Enter>
<7 7> + <shot>
Press the keys, <ON> + <4 6> + <Enter> or <7 7> +
<shot>, to display the OSD menu.
ENTER
Iris
<7 7> + <shot>
To send a “ENTER” command, press <Iris
Open/Close> or <7 7> + <shot>.
Set and execute PRESET
<set>
To set “Preset”, use the key <set>.
<shot> To execute a preset position, use the key <shot>.
Set and execute SEQUENCE
By OSD
To set “Sequence”, please enter the OSD and go to the
Preset setting menu.
<7 0~7 8> + <shot>
The following Presets allows you to execute Sequence
quickly.
***<7 0> + <shot>: Sequence 1
<7 1> + <shot>: Sequence 2
.
.
.
<7 6> + <shot>: Sequence 7
<7 8> + <shot>: Sequence 8
***<7 7> + <shot>: Reserved; also used to Open
OSD