Ganz ZC-PT series, Руководство по установке

Страница: 22 / 76

Installation Guide
21
3.5 Cable Wiring and Connection
Users may need to conduct cable wiring when: (1) Connecting self-provided cords to
the connector housing (shown in the figure below) instead of using the equipped
data cable or (2) Connecting alarm input and output devices. The table follows will
illustrate the way to wire cords into the connector housing. Please refer to the section
3.4.3 22-Pin Connector Definition for the exact position of each cord.
Insert the terminal into the pin holes
on the connector housing, with the
hook outward, as indicated in the
figure.
To unlock the terminal, press the
hook, as indicated in the figure, with a
proper tool and pull it out gently.
Connect the 22-pin connector to the socket on the PTZ Camera’s back plate.