EG-4
Attaching the unit
You can use the following three methods to attach the unit. Please use the
method that best fits the conditions of the area in which you want to install
the unit.
Attaching to the surface of the ceiling or wall
Use this method to attach the
unit to the surface of the ceiling
or wall.
(page EG-5)
Embedding in the ceiling or wall
Use this method to attach the
unit by embedding it in the ceiling
or wall.
(page EG-6)
●
Be sure to use the adapter ring to
attach the camera.
Attaching to a 4S junction box
Use this method to attach the
unit when a 4S junction box is
available.
(page EG-6)
●
Be sure to use the adapter ring to
attach the camera.
INSTALLATION AND ADJUSTMENT
(When using an AC24V 60Hz power source
in the line lock mode)
(Depending on the
method of attachment,
page EG-5, EG-6)
Installation and adjustment process
Use the following steps to attach and adjust the unit.
Drilling holes in the ceiling/wall
Attaching the camera body
Connecting the cables
(Page EG-7)
Setting the mode setting switch
(Page EG-7)
Attaching the service monitor
(Page EG-8)
Adjusting the camera direction
(Page EG-8)
Adjusting the view angle, focus and iris (Page EG-9)
Adjusting the line phase
(Page EG-9)
Adjusting the DC iris level
(Page EG-9)
Setting the D D/N switch
(Page EG-10)
Installation and adjustment complete (Page EG-10)
(US)ZC-D5000NTSC_0830.indd 4
2006/08/30 15:18:18
