The rule will create a zone and overlay it on the live view, the zone can be reshaped accordingly. Select-
ing a grey node will split the segment and create a more complex shape, to remove a segment select
the minus sign next to a red node.
4.7.1 Rule Properties
•
Name:
Defines the name of the rule.
•
Object Filter:
Allows the rule to be configured to only trigger based on an objects classification
(e.g. person, vehicle), any combination of the available options is possible.
Note: The available classifiers are different depending on the hardware platform and the installed license.
• Hardware Platform or License that Tracker Engine Selection is not available
Calibration
Available classifiers of Object Filter
disabled
Not available (Object Filter Off)
enabled
the classifier defined in the classification
• Hardware Platform or License that Tracker Engine is selectable
Tracker Engine
Calibration
Available classifiers of Object Filter
Object Tracker
disabled
Not available (Object Filter Off)
Object Tracker
enabled
the classifiers defined in the classification
DL Object Tracker
-
person, cyclist, bicycle, motorcycle, car, van, truck bus,
bag
DL People Tracker
-
person
4.7.2 Event Actions
•
Event Notifications:
Define the action that will occur on an event being triggered.
– TCP Event:
Enables/disables the triggering of the TCP notification when an event occurs.
– HTTP Event:
Enables/disables the triggering of the HTTP notification when an event oc-
curs.
The following applies for the notification methods selected.
•
Triggered By:
Define when the notification will be sent.
– Object:
Send notification for each object triggering the rule. Choose between the
begin
of
the object triggering the rule, as it enters the zones. and/or the
end
of the object triggering
the rule, as it leaves the zone. A notification will be sent for each object triggering the rule.
– Rule:
Send a notification every time the rule is triggered, from the
begin
point of the first
object to trigger the rule to the
end
point of the last object to trigger the rule. A notification
will be sent for each triggering of the rule, regardless of the number of objects triggering
at any one time.
Note: Remember to configure the TCP/HTTP notification actions for the action rules feature to function. Any
combination of the available options is possible.
8
Ganz GXi Series
VCA Interface Manual v1.0.66
07.12.22
Page 9
