Ganz Genstar ZNT8-BA1F-T Series, Руководство пользователя

Страница: 28 / 36

GANZ ZNT8-BA1Fxx-T Thermal Network Camera
User Manual
26 Issue V1.0 (2016-02-22)
Parameter Description Configuration Method
DVE Mode
Select a proper DVE mode based on the
contrast and detail characteristics of the image
shown. Available DVE modes include:

Default

Mode 1

Mode 2
[Configuration
method]
Select from the drop-
down list
[Default value]
Default
Dynamic
DVE
Sharpness of thermal images is not as good as
visible light, so the original image is difficult
to identify. By the image enhancement and
edge processing technologies, the image can
be better identified. The value range of this
parameter is 0~112 and users can adjust the
value based on requirement.
[Configuration
method]
Drag the slide bar
[Default value]
0
Mirror
Allow users to select image pixel position:

Off: images are not flipped.

Horizontal: image is turned left/right.

Vertical: image is turned up/down.

Horizontal + vertical: image is turned
upside down.
[Configuration
method]
Select from the drop-
down list
[Default value]
Off
5.3 FFC Mode
Figure 5-3 shows the FFC mode interface.
Figure 5-3 FFC mode interface