26
DISPLAY : SEQUENCE
(continued)
The square on the top left of the display represents the first sequence screen to be displayed.
To edit the screen, press
ENTER
to turn the cursor yellow. Using the up and down
CURSOR KEYS
,
choose the display mode (single-channel or various multi-screen modes).
When the correct screen type is displayed, use the
CHANNEL SELECTION
buttons to enter the channels
into each section of the multi screen modes.
Note
: Only one instance of each channel can be displayed.
To remove a channel, press the appropriate
CHANNEL SELECTION
button again.
SYSTEM SETUP
SYSTEM SETUP
Double click on the first screen of the sequence,
and the box will be outlined in yellow.
Each time the screen is clicked, the display mode
will change.
Right-click on a section of the multi-screen display.
Then click the desired camera number to assign it.
