Ganz C-AllView, Руководство по установке

Страница: 4 / 44

4
Introduction
The Camera unit is designed with harsh and difficult environments in mind and to
provide enhanced features over a normal speed dome camera.
These added benefits are:
•
Flat toughened glass window – scratch resistant, maintenance-free and
optically correct
•
Integral Wiper – to clean away rain and deposits caused by wind, sea spray
and road traffic
•
Hard anodised aluminium castings, with optional powder coating to prevent
corrosion in the harshest of marine environments
•
M4 marine grade stainless steel case fastenings
•
Optional Washer System
•
Optional Infra Red Led illumination system
•
Day night switching by external contact closure (optional alarm interface)
•
Multiple native protocols - coaxial and RS485
•
Optional RS485 alarm interfaces
Safety Warning
Installation of this product should only be carried our by a
competent and suitably qualified engineer. If you are in doubt,
you should refer the installation to a suitably qualified person.
Packing List
Included in the Rugged Camera kit:
1x Camera
&Power-Supply unit
1x 4”/101.6mm PCD adaptor & mounting bolts to Camera Unit
1x 10m composite cable and IP67 connector
1x Installer Manual
Parts not included:
Mounting hardware – e.g. nuts and bolts for 4” PCD adaptor to tower / bracket
Washer Nozzle & Bracket
Washer pump & Hose
Infra Red Lamps
Disclaimer
The manufacturer reserves the right to change specifications and procedures integral
to the operation, control and programming of this product at any time and without
prior notice.
This manual relates to firmware version 0.2.6